NTP Truboprovod
Piping Systems Research & Engineering Co
       
Information Technologies
Industrial Safety
Expert Review
Technical Diagnostics 
Russian 
Contacts Licenses
 News
 About
 
 Programs
 Downloads
 Design
 Diagnostics
 Expertise
 IT
 
 Licenses
 Dealers
 Contacts
|06.07.2011|PASSAT new version 2.03 release
PASSAT 2.03 new version is now available. This version has many new features including:
  • New elements in the standard elements database, including elements per ATK 24.200.02.90, ATK 24.218.06.90
  • New UI and 3D-view features
  • Calculations per GOST R 52857.5, GOST R 52857.11 and STO 36554501–015–2008 (wind resonance)
  • Various additional options in calculations, including options per GOST R 52857.3, GOST R 52857.4
  • More fine-tuning of calculation report
  • Export nozzles to Nozzle-FEM
    Download

    |10.03.2011|NTP Truboprovod has released English version of Hydrosystem software.
    NTP Truboprovod has officially released English version of Hydrosystem software for piping network flow analysis. The version includes all main features of Hydrosystem version 3.50, including pressure drop and heat loss calculation and nominal size selection for gas, liquid and two phase gas-liquid frozen flow, as well as program manual, user interface and result reports in English.

    |6.09.2010|ProSim and NTP Truboprovod enter distribution agreement.
    ProSim and NTP Truboprovod enter agreement to distribute ProSimPlus and Simulis Thermodynamics in Russia. Press release.

    |03.02.2010|«Nozzle-FEM» new version 2.05 release
    NTP Truboprovod Co. has released a new version 2.05 of «Nozzle-FEM» program.
    This version includes the following new options:
    • selection of appropriate stress estimation code; GOST R 52857.1–2007 and GOST R 52857.10–2007 (for hydrogen sulphide-containing media), which can be used along with PNAE G-7-002-86;
    • minimum possible distance from the nozzle to head and shell edge has been reduced;
    • optimized balance between geometrical dimensions of finite elements along axis of cylindrical shell now makes it possible to reduce calculation time, in particular, for long vessels and runs;
    • loads on bevelling cut are now applicable both to run and to branch coordinate systems;
    • adjustable quantity of circuits of stress isometric lines (3-30).

    |22.12.2009|PASSAT new version 2.01 release
    PASSAT 2.01 new version is now available.
    This version includes the following new features:
    1. Calculations as per GOST 52857-2007, including:
      • Standard material database has been brought into compliance with GOST R 52857.1-2007;
      • Calculation of shells and heads as per GOST 52857.2-2007;
      • Calculation of nozzles for pressure and external loads as per GOST R 52857.3-2007, GOST R 52857.9-2007;
      • Strength and leak tightness calculation of flange joints as per GOST R 52857.4-2007;
      • Strength calculation from influence of supporting loads as per GOST R 52857.5-2007;
      • Low-cycle strength calculation as per GOST R 52857.6-2007 is applied to all model elements;
      • Calculation of shell-and-tube heat exchangers as per GOST R 52857.7-2007;
      • Calculations of jacketed apparatuses as per GOST R 52857.8-2007, including cylindrical jackets with expansion joint;
      • Strength calculation under the influence of hydrosulphuric mediums as per GOST R 52857.10-2007.
    2. New option — import/export to open format XML — is now available.
    3. Elliptic heads per GOST 6533-78 have been added to standard material database.
    4. Supporting shells per ATK 24.200.04-90 ("PASSAT-Columns" module) have been added to standard material database.

    |10.12.2009|Ralph Grabowski visited NTP Truboprovod
    Famous CAD journalist Ralph Grabowski visited NTP Truboprovod 10 Sep during his upFront.eZine Tour of Russia. Read his review of this visit in his e-newsletter upFront.eZine.

    About Ralph Grabowski.
    Ralph Grabowski is editor at upFront.eZine Publishing, Ltd. Ralph is the author of over 100 books and several hundred magazine articles about computer-aided design. Read More about Ralph

    About upFront.eZine
    The upFront.eZine is weekly CAD e-newsletter, which is read in 70 countries. It is independent source of weekly business news and opinion for the computer-aided design (CAD) industry.

    |03.08.2009|PASSAT Program ver.1.09 R2 update is available
    NTP Truboprovod has released an update of PASSAT Program ver.1.09 R2. It is recommended to all users to install this version, uninstalling a current one beforehand. Download.

    |21.07.2009|Nozzle-FEM Program ver.2.04 is available
    NTP Truboprovod has released a new version 2.04 of Nozzle-FEM Program. Download.
    This version includes the following new options:
    • program handling and receiving reports in the English language;
    • calculation of straight and bevelling tie-ins into the main pipeline. Loads can be applied both to branch section and main pipeline section on free edge;
    • program application conditions are extended due to reduction of minimum distance from shell's (head's) edge to nozzle;
    • a new option - preview of calculation model in deformed state;
    • improved tables view in reports for more convenient transfer to MS Office documents.

    |30.06.2009|PASSAT Program -new version 1.09 is available
    NTP Truboprovod has released a new version 1.09 of PASSAT Program.
    This version supports the following new options:
    • calculation of elements with different form jackets;
    • database of standard elements was enlarged, and some more improvements were implemented.

     Top 
    111141, Plechanova 7, Moscow, Russia Phone +7 (495) 225-94-35, 741-5941; Fax +7 (495) 368-5065
    webmaster@truboprovod.ru Copyright © 2002 NTP Truboprovod